Fairbanks FB3000 Kernel Program Operators Manual - Manual (Page 20)

Section 4: Input/ Output (I/O)
04/12 20 51147 Rev. 3
4.2.6. Customizing the Output Data Strings
The FB3000 Kernel Weight Server program can also be customized to support
numerous manufacturers software interfaces and peripheral devices. When
programming a Data String Protocol not formatted as one of the
Load Defaults ,
the Output Data String must be programmed manually using the Build,
Tokens, and Weights Tabs.
4.2.7. Steps in Customizing
Follow these steps to customize the Output Data String.
1. Locate the required Output Data String by viewing history from previous work
completed with the customer, or by emailing and/or calling the company directly
and asking their IT Department for this information.
2. Compare the required Output Data String with the five Load Default
configurations.
3. Open the Load tab.
4. Select the COM Port to be
configured.
5. Select the Load Default that
most resembles the required
Output Data String format
.
6. Press the button.