beautypg.com

Section 2: assembly, Necessary tools, Wheel & pillar assembly – Fairbanks 1155 SERIES Portable Utility SCALE WITH THE FB2255 User Manual

Page 12: 2 wheel & pillar assembly

background image

02/13

12

51315 Rev. 1

Section 2: Assembly

2.1. NECESSARY TOOLS

Small Slotted Screwdriver

Phillips Screwdriver

10" Adjustable Wrench

Common Pliers

2.2

WHEEL & PILLAR ASSEMBLY

1. Set the Scale Base Assembly

(#4

) sideways on the floor.

2. Insert a cotter pin

(#17

) through the small hole in one end of the first axle

(

#19

).

3. Place a flat washer (

#18

) and a wheel (

#16

) onto the open end of the axle.

4. Insert the axle's other end through both holes in the base.

5. Place the second wheel (

#16

) onto the axle.

6. Place a flat washer over the axle, and then insert a cotter pin through the axle’s

small hole.

7. Repeat steps 2-4 for the second axle.

8. With the scale in its upside-down position, center the axles in the base.

9. Insert the locking screws (

#15

)

into the tapped holes in the bottom
of the base, tightening the axle into
place with the screws.
─ Directly under the axle holes.

10. Secure the lock nuts (

#14

).