Darex XPS-16 SCHEMATICS & WORK INSTRUCTIONS - Manual (Page 23)

User Manual Page 23
Removing and Replacing the LCD Display
Removing and Replacing the LCD Display
1. Remove the screws on the door support and
top cover.
2. Remove the door support cover and lift the
top cover.
3. Located at the bottom of the LCD display is
the interface board. Using two fingers on the
outside of the board, pull from the LCD recep-
tacle. Leave all wires connected to board.
4. Unplug the green five wire connector from the
LCD.
5. Remove the single screw on the RS232 con-
nector and unplug from the LCD.