Abocom 802.11 b/g/n Mini Wireless LAN USB 2.0 Adapter None - Manual (Page 28)

- 24 -
WMM/QoS Tab
WMM Enable Check the box to enable Wi-Fi Multi-Media function that is meant to
improve audio, video and voice applications transmitted over Wi-Fi.
WMM- Power Save
Enable
Select a power save mode that preferred.
z
AC_BK (Access Category Background)
z
AC_BE (Access Category Best Effort)
z AC_VI (Access Category Video)
z AC_VO (Access Category Voice)
Direct Link Setup
Enable Check the box to enable Direct Link Setup (DLS). This function will be
enabled under the connection with AP which must support the DLS function.
Direct Link Setup allows direct STA-to-STA frame transfer within a BSS
(B
asic Service Set ). This is designed for consumer use, where STA-to-STA
transfer is more commonly used.
MAC Address The setting of DLS( Direct Link Setup) indicates as follow :
Fill in the blanks of Direct Link with MAC Address of target STA, and the
STA must conform to two conditions:
z Connecting with the same AP that supports DLS feature.
z DLS enabled.
Timeout Value Timeout Value represents that it disconnect automatically after few seconds.
The value is integer that must be between 0~65535. It represents that it
always connects if the value is zero. (Default setting of Timeout Value is 60
seconds.)
Apply Click this button to apply the settings.
Tear Down Select a direct link STA MAC address, then click "Tear Down" button to
disconnect the STA.
WPS
The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simplify the security
setup and management of Wi-Fi networks. The STA as an Enrollee or external Registrar supports the
configuration setup using PIN (Personal Identification Number) configuration method or PBC (Push
Button Configuration) method through an internal or external Registrar.