Abocom 802.11 b/g/n Mini Wireless LAN USB 2.0 Adapter None - Manual (Page 25)

- 21 -
Signal Strength 1
Shows the receiving signal strength, users can choose to display as
percentage or dBm format.
Noise Strength Shows the noise signal strength in the wireless environment.
Transmit Shows the current Link Speed and Throughput of the transmit rate.
Receive Shows the current Link Speed and Throughput of receive rate.
Link Speed Shows the current transmitting rate and receiving rate.
Throughput Shows the transmitting and receiving speed of data.
Advanced
This Advanced page provides advanced and detailed settings for the wireless network.
Advanced Tab
Wireless mode Here supports 2.4G (included 802.11b/g/n) wireless mode.
Enable TX Burst Check to enable this function. This function enables the Wireless LAN USB
Adapter to deliver better throughput during a period of time, it only takes
effect when connecting with the AP that supports this function.
Enable TCP Window
Size Check to increase the transmission quality. The large TCP window size the
better performance.
Fast Roaming at
dBm Check to set the roaming interval, fast to roaming, setup by transmits power.
(Default setting is -70dBm.)
Show Authentication
Status Dialog When connected AP with authentication, choose whether show
"Authentication Status Dialog" or not. Authentication Status Dialog displays
the process about 802.1x authentications.