Ashly PE-Series - Manual (Page 4)

Graphic EQ
Think the PE Series is powerful on its own? Just wait until you add the
optional DSP card. With it, you can make quick work of just about any signal
processing task you can imagine. Equalization, filters, mixer, gate, compres-
sor/limiter and network control, make the PE Series amplifier with the DSP
card perfect for many applications from live sound, to commercial sound
reinforcement to installations.
Features include:
• DSP processing on 2 input x 4 output channels (2 amp channels
+ 2 aux channels). One card controls two amps!
• AES3 digital audio input is standard.
• Sharc 200MHz 32-bit floating-point processor.
• 32-bit processing, 48 kHz or 96 kHz operation
• Ethernet control of everything (auto IP configuring).
• “Click and Hot-Plug” user selectable processor blocks.
• Full set of filter types include graphic, parametric, notch, shelving,
high/low/allpass.
• Time delays, limiters, gates, signal generators (white, pink noise,
sinewave), matrix mixer.
• Crossover filters of all types up to 48dB/octave.
• 3 contact closure preset recall, DC remote attenuators
and remote power-down.
• Analog and Digital inputs
• Remote attenuator port
• Remote standby port
• Separate versions for XLR or Euroblock inputs
High Pass/Low Pass Filter
Gate
The PE DSP Card
Parametric EQ
2 x 4 Mixer
Compressor/Limiter