Elite Screens ChromaFlux (Water Based) - Manual (Page 6)

043014-KY www.elitescreens.com 6
2. First coat: Horizontal pattern application
a. The first coat of paint is to be applied in a horizontal pattern starting from the top left corner of the
desired viewing area. The end point will be the bottom left corner.
b. When you reach the top right corner of the viewing area, continuously spray the paint keeping the
nozzle in the same angle and move downwards to the next stroke of paint and make sure that you
overlap the first stroke by 1/3 of the girth of paint. Continue to spray from right-to-left, then left-to-
right, until you reach the edges of the viewing area.
c. Continue this pattern until you reach the bottom left corner of the viewing area (end point).
3. Second coat: Vertical pattern application
a. The second coat of paint is to be applied in a vertical pattern starting from the top left corner of the
viewing area. The end point will be the top right corner.
b. When you reach the bottom left corner of the viewing area, continuously spray the paint keeping the
nozzle in the same angle and move to the right of the first stroke of paint and make sure that you
overlap the first stroke by 1/3 of the girth of paint. Continue to spray from top-to-bottom, then bottom-
to-top, until you reach the right edge of the viewing area.
c. Continue this pattern until you reach the top right corner of the viewing area (end point).
Refer to this diagram as a reference
to the proper painting pattern for
application of the second coat.
Applying the paint in a vertical pattern
Ending
point
Starting
point
Refer to this diagram as a reference
to the proper painting pattern for
application of the first coat.
Applying the paint in a horizontal pattern
Ending
point
Starting
point