Elite Screens ChromaFlux (Water Based) - Manual (Page 3)

043014-KY www.elitescreens.com 3
3. If the surface is not uniformly smooth, smoothen it out with 500-grit sandpaper.
4. Should there be any holes or cracks on the viewing area, fill them with dry wall plaster and a spatula.
5. After the viewing surface is prepared, use a dampened lint free cloth to wipe the area before applying
the paint.
6. Be sure to cover any items, such as furniture and wall decorations, around the work area with shielding
plastic (or paper) and tape.
B. Installer preparation:
Here are some examples of what to wear during the installation of the paint (gloves, mask, long-sleeve
shirt). We recommend the use of a long sleeve shirt to protect your arms from paint exposure.
C. Preparation of paints:
C1. CineWhite 2D Base coat :
1. Dilute : Empty the full can of paint (700 g) into a mixing container. Dilute the paint with 230 g of
water .
2. Mixing : Mix the paint and water with a wooden or plastic stick (free from dust particles) for about 10
12 minutes.
3. Observe: When the mixture becomes one solid color, it is ready to be applied to the viewing surface.
Wall
cecececece
Wall or
Base material
painted viewing area
Mask Long-sleeve
clothing
Gloves