Elite Screens ChromaFlux (Water Based) - Manual (Page 2)

043014-KY www.elitescreens.com 2
What’s in the package
Please make sure all parts listed below are included.
Tools required (not included):
Carpenter’s Pencil Measuring Tape Dust Cover Fabric 500-grit sandpaper Plastic bucket
Mask Drywall Plaster Spray Gun Gloves
Installation
A. Preparing the wall/surface for painting: Please ensure that the surface to be coated is clean and grease-
free. The smoother the surface the better finished product will be.
Porous surfaces such as drywall, gyproc, and wood based materials such as plywood, particle board, MDF,
should be sealed with a flat, white latex primer prior to applying ChromaFlux screen paint. Colored surfaces
should also be primed with a flat, white latex.
1. Make sure that the work area is well ventilated by keeping all windows open (doors if possible as well).
2. The viewing surface area must be free from any cracks, bumps, debris, etc. to ensure that the paint will
be applied smoothly.
Model: ScreenPaint2DWS
Parts List QTY
C, D. 2D Base coat 2
Note: same paint.
C D
Model: ScreenPaint5DS
Parts List QTY
A. 2D Base coat 1
B. Silver 3D coat 1
A B