Elite Screens ezFrame2 Series - Manual (Page 7)

Rev.041114-JA www.elitescreens.com 7
Installation
1. Locate
your
desired
installation
location
with
a
stud
finder
(recommended)
and
mark
the
drill-­‐hole
area
of
where
the
screen
is
to
be
installed.
2. Drill
a
hole
with
the
proper
bit
size
according
to
the
wood
screws
included.
3. Line
up
the
wall
brackets
with
the
drilled
holes
on
the
installation
location
and
screw
them
in
using
a
Phillips
screwdriver.
Note:
Use
2
top
wall
brackets
on
diagonal
sizes
below
135”,
and
use
3
top
wall
brackets
on
diagonal
sizes
135”
and
above.
4. Position
the
fixed
frame
screen
onto
the
top
wall
brackets
as
shown
in
(Fig.
18)
and
push
down
at
the
center
of
the
bottom
frame
to
secure
the
installation.
5. The
design
of
the
wall
brackets
allows
the
frame
to
slide
over
them
through
its
sides.
This
is
an
important
feature
of
the
installation
design
as
it
allows
your
screen
to
be
properly
centered.
6. Using
both
hands
finish
the
installation
by
pushing
the
lower
portion
of
the
fixed
frame
screen
into
the
lower
bracket
as
shown
in
Fig
19.
CAUTION
Please follow these instructions carefully to ensure proper maintenance and safety of your Fixed Frame Screen
1. When hanging the screen up, please make sure that no other objects such as power switches, outlets, furniture,
ladders, windows, etc. occupy the space designated for your Fixed-Frame screen.
2. Regardless if the screen is hung on or installed into the wall, make sure that the proper mounting anchors are used
and that the weight is supported appropriately by a strong and structurally sound surface just as any large and heavy
picture frame should.
(Please consult a home improvement specialist for the best advice on installation)
3. Frame parts are made of high quality velour-surfaced aluminum and should be handled with care.
4. When not in use, cover over the screen with a furniture sheet to protect it from dirt, grime, paint or any other
impurities.
5. When cleaning, use a damp soft cloth with warm water to remove any marks on the frame or screen surface.
6. Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface.
7.
In
order
to
avoid
damaging
the
screen,
avoid
touching
it
directly
with
your
fingers,
tools
or
any
other
sharp
or
abrasive
objects.
8.
Spare
Parts
should
be
placed
out
of
reach
of
small
children
in
accordance
with
household
safety
guidelines.
For
a
local
Elite
Screens
contact
or
Technical
Support,
please
visit
www.elitescreens.com
(Fig. 18)
(Fig.19)