Fig.3), Fig.1) – Elite Screens ezFrame2 Series User Manual
Page 2
Rev.041114-JA
www.elitescreens.com
2
Push
Push
Short frame
Short frame
2. Insert the other ½ horizontal frame piece to the center joint connector and fasten it with two M5x15 head
screws
. Repeat steps 1 and 2 for assembling the second horizontal frame.
Note: a. Two ½ size horizontal frames should be assembled for a screen.
b. Do not tighten the screws completely until all frame pieces have been assembled correctly.
3. Insert both elbow joint connectors into the long horizontal frame and fasten it with two M5x15 screws (seeFig.1).
Then insert the vertical short frames into the exposed elbow joint connectors and fasten them with screws (fig.1.2).
Bevel
connection
M5x15 screws
½ Long Frame
Push
Horizontal Long Frame
M5×15 screws
M5×15Screws
M5×15 screws
Screw
( fig.3)
(Fig.1.1)
(Fig.1.2)
Push
Push
Joint
Long frame
( fig.1)