Elite Screens ezFrame Plus Series - Manual

1
Rev.091912-JA
www.elitescreens.com [email protected]
Elite ezFrame/Cinema235 &
Sable Frame Series
Fixed Frame Projection Screen
User’s Guide
Parts List
1. Frame Parts x 6 pcs (4 top/bottom frame pcs. + 2 side frame pcs)
2. Tension Rods x 6 pcs (4 top/bottomrods + 2 side rods)
3. Screen Material x 1 pc
4. Center joints x 2 pcs
5. Elbow Joints x4pcs
6. Wall brackets x2 – 3 pcs (depending on model/size)
7. Screws x 16 pcs
8. Center Support Bar x 1 – 2 pcs (depending on model/size)
9. Support joiner x 2 – 4 pcs (depending on model/size)
10. Fix Plates x 30 – 90 pcs (depending on model/size)
Note: Please make sure all parts are included in your package before proceeding to assemble your Elite
Screens fixed frame projection screen.
FRAME ASSEMBLY
1. Insert the center joint connector to the horizontal frame piece and then fasten it with 2 screws.