Elite Screens Lunette Series - Manual (Page 8)

Rev042314 EA www.elitescreens.com 8
Installation
1. Use butterfly screws to install the upper bracket as shown in diagram:
Use butterfly screws to assemble a 1.77” L-Bracket and a 3.54”L-Bracket into an upper bracket
2. Locate the height where you want to set up, and draw an upper base line. Confirm the distance
between the two brackets on the level direction following E on the diagram below. Mark the hole
location on the wall by following the base line and the upper bracket’s screw hole site, and then
drill the hole. Insert the wall anchor and tighten the upper bracket using the provided screw.
(The base line must be on the level.)
3. Draw a lower base line according to F and the upper base line, and then make a hole on the wall
according to the screw hole location for the lower bracket, then insert the anchor and tighten the
lower bracket with the
provided screw.
Upper base line
Upper bracket
Wood screw
Hollow wall anchor
Wall
Wall
Upper bracket
Lower bracket
Hollow wall anchor Wood screw