Elite Screens Lunette Series - Manual (Page 7)

Rev042314 EA www.elitescreens.com 7
Center Support Bar
1. Center Support Bar may be packed in a plastic tube with the screen material.
Center support bar
2. Insert the Center Support Bar into the upper top groove on the back of the frame (note: this not
the same groove where the fix plate inserts) with the bottom end near the center point of the
frame, and place it in at an angle so that both ends of the bar are aligned with the groove.
3. Slide the top end of the bar into the top center point location (as shown below) to complete the
center support bar installation. This will provide added stability to the frame and added
tension to the material.
支
撑
For 165” and above models