Elite Screens Lunette Series - Manual (Page 6)

Rev042314 EA www.elitescreens.com 6
Attaching the Fix Plates
1. Make sure that the material and frame are both lying face down on a clean, dry, and non-
abrasive surface.
2. Center the material inside the frame.
Please note the material will be noticeably smaller than the frame, as the material must be
stretched to create a sufficient amount of tension for perfect material flatness.
3. Start attaching the Fix Plates in the corner of the frame’s horizontal edge, and then alternate
with the corners of the frame’s vertical edge as shown in diagram.
4. Attach the fix plates starting from the ends and moving towards the center as shown in the
diagram below to create an evenly tensioned surface.
Example 1 Example 2
Fix Plate Push
Fig. 6
Fig. 5