PROLiNK MH8241 - Manual (Page 63)

63
5.7.2 Current Routing Table
This display shows the valid routing paths in Broadband Router. Users
can view the information about current routing paths.
ROUNTING TABLE – CURRENT ROUTING TABLE
5.8 Access Control
5.8.1 Local IP Filtering
- Gateway Mode only
Broadband Router allows you to do accessed restriction of block/allow
outgoing IP packets by protocol (port number).
You may restrict some IP’s only to perform limited protocols or allow them
to execute partial protocols. And the first thing you have to know is the port
numbers and their usages.
Local IP Filtering allows you set ten items and item 1 has the highest
priority. In principle, the same IP should not list in different items. If IP settings
confliction occurs, item with higher priority would be the obeyed rules.
You can reserve dedicate IP address to dedicated user from “ Configure
LAN” display -> “Reservations IP” function, by using this function, user can
have dedicated IP address match to their computer NIC MAC address.
There are ten items in this function. You can allow or restrict specific IP(s)
to access some port numbers.