PROLiNK MH8241 - Manual (Page 52)

52
WAN CONFIGURE - SCHEDULE
5.4.1 [Dynamic IP]
connect to CABLE MODEM
Gateway / Basic Mode:
When choose Dynamic IP, you only need to save this selection
When finish setting all parameter, reboot router.
Router Mode:
For Intranet use only, Broadband Router can obtain IP(s) from DHCP
server automatically.
5.4.2 PPPoE/Dial Up DSL Type
(Gateway / Basic NAT Mode only)
Select [PPPoE /Dial Up DSL] and you will need to enter the ID and
Password. Sometimes you also need to input the Service Name if ISP
requires for it. Max Idle Time is using to disconnect the ADSL connection
automatically after the idle period you define. The unit is minute and the
default is 0. This default value let Broadband Router remain connecting all the
time unless disconnected by user manually or ISP. If you define the period as
3, and the Broadband Router will auto disconnect after idling 3 minutes.
Supposing that you don’t have the Service Name, you may ask your ISP for it.
Account: User Name, provide by ISP, up to 40 characters can be enter.
Password: provide by ISP, up to 40 characters can be enter.
Max Idle Time: o =no check, check by minutes