PROLiNK WN2000 Wireless-N User Manual - Manual (Page 71)

- 65 -
If you select the AP that listed in the WPS Profile List
field, you can click the Detail button to see more AP
information.
SSID: Shows the connected AP network name.
BSSID: The MAC address of the connected AP. Fixed
and cannot be changed.
Authentication Type: The authentication type support
Open, WPA-PSK and WPA2-PSK.
Encryption Type: For Open authentication mode, the
selection of encryption type are NONE and WEP. For
WPA-PSK and WPA2-PSK authentication mode, the
encryption type supports both TKIP and AES.
Key Length: Only valid when using Open authentication
mode and WEP encryption. There are key lengths 5, 10,
13 and 26.
Key Index: Only valid when using Open authentication
mode and WEP encryption. There are 1~4 key index.
Key Material: The key material can be used to ensure the
security of your wireless network. Fill in the appropriate
value or phrase in Key Material field.
Show Password: Check this box to show the passwords
that have been entered.
OK: Click to save and apply the new settings.
Cancel: Click to leave and discard the settings.
Connect Command to connect to the selected network inside
credentials. The active selected credential is as like as the
active selected Profile.
Rotate Command to rotate to connect to the next network inside
credentials.
Disconnect Stop WPS action and disconnect this active link. And