PROLiNK WN2000 Wireless-N User Manual - Manual (Page 35)

- 29 -
WMM Enable Check the box to enable Wi-Fi Multi-Media
function that is meant to improve audio, video
and voice applications transmitted over Wi-Fi.
WMM- Power Save Enable Select which ACs you want to enable the power
saving mode.
AC_BK (Access Category Background)
AC_BE (Access Category Best Effort)
AC_VI (Access Category Video)
AC_VO (Access Category Voice)
Direct Link Setup Enable Check the box to enable Direct Link Setup.
MAC Address The setting of DLS( Direct Link Setup) indicates
as follow :
Fill in the blanks of Direct Link with MAC
Address of STA, and the STA must conform to
two conditions:
• Connecting with the same AP that supports
DLS feature.
• DLS enabled.
Timeout Value Timeout Value represents that it disconnect
automatically after few seconds. The value is
integer that must be between 0~65535. It
represents that it always connects if the value is
zero. Default value of Timeout Value is 60
seconds.