Poweramp POWERHOOK SERIES - Manual (Page 9)

7 4111-0010 — Nov 2010
1. The owner/ user should recognize the inherent dangers of the interface between the loading
dock and the transportation vehicle. The owner/ user should, therefore, train and instruct
all operators in the safe operation and use of the loading dock equipment in accordance
with manufacturer’s recommendations and industry standards. Before operation of the
equipment, all operators shall read, understand and be familiar with all functions of
equipment as described in the owner’s/user’s manual.
2. The manufacturer shall provide to the initial purchaser all necessary information with regards
to: Safety Information, Operation, Installation and Safety Precautions, Recommended
Initial and Periodic Inspections Procedures, Planned Maintenance Schedule, Product
Specifications, Troubleshooting Guide, Parts Break Down, Warranty Information and
Manufacturers Contact Information. The owner/ user shall be responsible to verify that this
information is available and received as well as proper instructions, training and familiarity of
the equipment for all operators has been completed. Owner’s/User’s shall actively maintain,
update and re train all operators on safe working habits and operations of the equipment.
3. It is recommended when the transportation vehicle is positioned correctly in the dock opening
and in contact with both bumpers, there shall be a minimum of 4.00 inches (100mm) overlap
of the leveling device and the transportation vehicle at all times during the loading and
unloading process.
4. Name plates, placards, decals, instructions and posted warnings shall not be obscured from
the view of the operator or maintenance personnel for whom such warnings are intended
for. Contact manufacturer for any replacements.
5. Manufacturer’s recommended periodic maintenance and inspection procedures in effect at
the date of shipment shall be followed at all times. Written documentation of maintenance,
replacement parts or damage should be retained. In the event of damage notification to the
manufacturer is requested.
6. Any modifications or alterations of loading dock equipment shall only be done with prior
written approval from the original equipment manufacturer.
7. 7. When industrial moving devices are being used in the loading or unloading of product
from the transportation vehicle, this vehicle shall have the brakes and wheel chocks applied
appropriately or all other positive restraining device shall be fully utilized.
8. Loading dock safety equipment should never be used outside of its intended use, range, or
capacity. Please consult the manufacturer if you have any questions as to the use, range
or capacity of the equipment.
9. When selecting loading dock safety equipment, it is important to consider not only present
requirements but also future plans and any possible adverse conditions, environments or
use.
OWNER’S/USER’S RESPONSIBILITIES