American Dynamics ADCC1100 - Manual (Page 39)

33
Keyboard Installation and Operation
Programming Smart Cards
Smart card programming can be done in sections:
1. User codes, names, and partition information
2. Macro page and macro icon information
3. Macro function information
Smart card functions include:
• Read smart card - reads information on an existing smart card such as User
name, User ID, Macro Group Name, Access Level, and Partitions.
• Program smart card - programs current keyboard information, or any information
that has been read or edited from another smart card, to the smart card currently
in the keyboard's smart card slot.
• Program macro - programs a smart card with the macro information which is
currently active on the keyboard. Allows changes to macro page, and macro icons
to be programmed to the smart card.
• Read Macro - reads an existing smart card's macros including macro page, and
macro icon information. This can then be previewed using the keyboard prior to
programming to another smart card.
Reading a Smart Card
A smart card with sufficient privileges must be first used in order to access the key-
board's program mode.
1. Press the PROGRAM MODE tab key. Press the NEXT soft key.
2. Press the SMART CARD soft key. Press the READ SC soft key.
3. The keyboard will display the message "Please Replace Smart Card". Insert the
smart card to be read and the display will change showing the information on the
new smart card—figure 4.5.
Program Mode Macros Operator
User Name: Read
SC
Prog
SC
Prog
Macro
Read
Macro
User
Name
User
ID
Macro
Name
Admin
B o b S m i t h
User ID:
15
Macro Group:
Level 1
Access Level:
O p e r a t o r
Figure 4.5: Read Smart Card