beautypg.com

Operating procedure – Bosch DWK096652 Edelstahl User Manual

Page 12

background image

12

Operating procedure

The most effective method of removing

vapours produced during cooking is to:
Switch the ventilator ON as soon as you

begin cooking.

Switch the ventilator OFF a few minutes

after you have finished cooking.

Switch ON/OFF Pilot-lights: press

to switch on/off lights.

Switch OFF suction / ON speed

(rating) of suction speed 1: press this
switch once turn off the speed (rating) of

suction function that has been selected or (if

no speed rating of suction function select the

speed (rating) of suction speed 1, press

again and keep pressed to activate the time-

function for 20 minutes (blinking light),
following this the cooker hood will switch off.

2

Speed selecting button suction

speed 2: press this switch once to select the

speed rating of suction speed, press again
and keep pressed to activate the time-

function for 15 minutes (blinking light)
following this the cooker-hood will switch off.

3

Speed selecting button suction

speed 3: press this switch once to select the

speed rating of suction speed, press again

and keep pressed to activate the time-

function for 10 minutes (blinking light)
following this the cooker-hood will switch off..

Speed selecting button (speed

rating) for intensive suction (with timer):

press to select the suction-speed (rating) ,

the functioning-time is 5 minutes (blinking
push-button) , following this the suction

function will either turn off or return to the

suction-speed that had previously been

selected.

Note: It is possible to

keep a check of this function so that the

hood switches off 5 minutes after it has

worked, (even though another function had

been selected prior to this one) after having
pressed the button, press again and keep

pressed , the pilot-light will start blinking

indicating that the selected function has
been set.

Reset Button for saturation of

filters: the hood will warn the user that it is

time to do maintenance work on the filters,

by giving out a light-signal.
Red-light Button blinking: carry out the

maintenance of the greasy filters, following

this press the button for over 3 seconds and
the button will turn off.
Red-light Button: carry out maintenance on
carbon-filters, following this press the button

for more than 3 seconds, the button will

switch off.
Attention: the hood is provided only with a

warning signal for greasy filters.
To put into function the greasy-filter signal:

Set the cooker-hood off, press switch button

for more than 3 seconds ( the switch will

turn on red signalling that the function has

been set.
To disactivate the carbon filter signal, repeat
the entire procedure again.