Bosch PRR726F71E Gas-Kochstelle Glaskeramik 70 cm - Manual (Page 15)

15
Warnings
This appliance will not function if it is not connected to the
mains or if the electricity supply is cut off.
It is normal to hear a soft whistling noise while the burner is
operating.
When first used, it is normal for the burner to give off odours.
This does not pose any risk and does not indicate a
malfunction. They will disappear in time.
An orange-coloured flame is normal. This is caused by the
presence of dust in the atmosphere, spilt liquids, etc.
Keep the burner as clean as possible. If the ignition sparkers
are dirty they will not light properly. Clean them periodically
using a small non-wire brush. Bear in mind that the ignition
sparkers must not suffer any serious impacts.
Cooking guidelines
Operating indicators and error messages
Burner Very high - High Medium Low
Wok burner Boiling, steam-
ing, griddling,
toasting, paellas,
Asian food (wok).
Reheating and keeping
things hot: cooked and pre-
cooked dishes
Rapid burner Escalopes,
steaks, ome-
lettes, frying
Rice, white
sauce, ragout
Steaming:
fish, vegeta-
bles
Semi-rapid
burner
Steamed pota-
toes, fresh vege-
tables, vegetable
stews, pasta
Reheating, keeping things
hot and making tasty casse-
roles
Auxiliary
burner
Cooking: casse-
roles, rice pud-
ding, caramel
Defrosting
and slow
cooking: veg-
etables, fruit
and frozen
products
Melting: but-
ter, choco-
late, jelly
Indicators Description Meaning
The childproof lock indicator lights up. Childproof lock activated: press the childproof
lock switch for 4 seconds to activate the appli-
ance.
The main switch indicator lights up. The appliance is ready for use.
The main switch indicator and the operating
indicators of the burners light up.
All the burners are switched on or are still hot.
The main switch indicator lights up and the
operating indicator of one of the burners
flashes.
The burner could not be switched back on
(because it is dirty, there are bits of food stuck
to it, the burner components are not correctly
positioned or there is a strong draught).
The main switch indicator is turned off and the
operating indicator of one of the burners
flashes.
Operating error: control knob is on without first
switching on the main switch.
Automatic off: the appliance has been on for
more than six hours.
The main switch indicator and the operating
indicators of the burners flash in succession.
Protection against overheating: turn all the con-
trol knobs to setting 0 and allow the appliance
to cool until the operating indicators switch off
or the residual heat indicator comes on.