Bosch HBC86K753 Edelstahl Kompaktgerät mit integrierter Mikrowelle - Manual (Page 6)

to a professional standard in accordance
with these installation instructions. The
installer is liable for damage incurred as a
result of incorrect installation.
Fitted units must be heatĆresistant up to
90 ºC, and adjacent unit fronts up to at
least 70 ºC.
Cut outs should be removed from the
units and the worktop before fitting the
appliances. Remove shavings as they can
affect the proper functioning of electrical
components.
Appliance under worktop Ć Fig. 1
There must be a ventilation cutĆout made
in the intermediate floor of the converted
cabinet Ć see Fig. 1.
If the appliance is being installed beneath
a hob, observe the hob installation
instructions.
Appliance in a tall cabinet Ć Fig. 2
The appliance may only be fitted above
a ventilated oven from the same
manufacturer.
Installation above a refrigerator is
possible.
The appliance must not be fitted above
a steamer, combination steam oven or
a dishwasher.
Corner installation - Fig. 3
Take the measurement in Fig. D when
installing the oven in a corner into
consideration. Measurement E
depends on the thickness of the front of
the unit and the handle.
Securing the builtĆin
oven - Fig. 4
J Insert the oven and align centrally.
J Do not kink the connection cable.
J Secure the oven with screws (4 x 25)
J The gap between the work surface
and the oven must not be sealed by addiĆ
tional strips.
Removal
Disconnect the cooker from the power
supply. Loosen the securing screws. Lift
the cooker slightly and pull it out
completely.