Alliance Laundry Systems 105 - Manual (Page 32)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
30 M414545
STEAM REQUIREMENTS
STEAM DRYING TUMBLERS ONLY
Figure 9
Table 3
STEAM
BONNET
12" (30.5 cm)
RISERS
SUPPLY
RETURN
GATE
VALVE
TRAP WITH
BUILT-IN
STRAINER
UNION
CHECK
VALVE
CHECK
VALVE
CONDENSATE
RETURN LINE
FROM
SUPPLY LINE
VACUUM
BREAKER
SOLENOID
VALVE
(Supplied with
machine)
T221IE3H
NOTE: For sizing of steam lines. Piping
must also be sized accordingly for length
of runs, and number of elbows. Refer to
Table 3.
TUMBLER
MODEL
STEAM PRESSURE
(PSI)
MINIMUM PIPE
DIAMETER
STEAM TRAP SIZE
(Pounds Condensate/Hour)
30CSL 7-15 3/4" (1.9 cm) 140
30CSH 80-100 3/4" (1.9 cm) 140