Perma Pure Micro-GASS UG-1212 - Manual (Page 16)

Remove this fitting
7. Cut the wire tie that holds the dryer in a loop.
8. Pull gently on the filter housing flange and slip the entire filter/dryer assembly out of the
system.
9. Refer to the MD dryer element replacement instructions and replace the dryer element.
Sample Pump Replacement
Under the operating conditions specified, the sample should last for more than a year under
typical conditions.
Remove the four mounting screws, disconnect the electrical connector and tubing from the
pump. Remove pump.
Remove these
four screws
16