0 advanced features and the setup menu for hh9 – Nova-Tech LMI Series HH Metering Pump User Manual
Page 33

33
13.0 Advanced Features and the Setup
Menu for HH9
Advanced features such as Batch Accumulate, Computer Interfacing,
and Automatic Voltage Compensation, may be selected and altered
in the Setup Menu of the Series HH9. The following configuration
chart describes each menu item, its description, and available
settings.
Menu
Description/
Item
Function
Setting
Notes
Software Revision
Read Only
1
Batch Accumulate
0 = Disable
Applies to External Multiply mode
1 = Enable
3
Automatic Voltage
0 = Disable
Becomes active two (2) minutes after
Compensation
1 = Enable
power up.
6
Input Pulse Width
0-60
Allows pulse widths of 1 to 60 mSec to be
set. Setting of 0 gives a debounce time of
approximately 1 mSec.
7
Integral Blowdown
0 = Disable
Allows Activation of the integral blowdown
1 = Enable
feature.
8
Integral Blowdown
0 to 255
Set solenoid ON time in seconds.
Solenoid ON Time
(Seconds)
9
Integral Blowdown
0 to 255
Set pump ON time in seconds.
Pump ON Time
(Seconds)
Note:
Allow 15 seconds after programming before disconnecting from power
to ensure latest changes are stored in nonvolatile memory.