Nova-Tech Digi–Sense 12-Channel Benchtop Scanning Thermometer - Manual (Page 50)

49
How to set the time
The time must be set as 24-hour time. For times after 12:59 p.m. add 12
to the hours. Thus, 2:22 p.m. is 14:22, and 5:00 p.m. is 17:00.
To set the time:
1. Push MENU until TIME 1a is displayed and the current setting 1b
flashes.
NUM 1c is flashing to indicate that number keys 2 are active.
2. Use number keys to enter the correct time.
(To enter 18:21 push 1 - 8 - 2 - 1.)
3a. Push EXIT to save the setting and return to scanning, or
3b. Push MENU to switch to the next setup topic (field calibration).
Front panel displays and controls continued
How to set the time
NUM
+ -
A L A R M
E X I T
MENU
1
S T O R E
2
L O G
3
R E C A L L
4
P R I N T
5
M A X
6
M I N
7
A V G
8
H O L D
9
S C A N
NUM
1a 1, 3b
3a
1b
1c 2
0
CLEAR
BA 44-49 10/12/01, 11:06 AM 49