Nova-Tech CBC Series User Manual
Page 22
© Adam Equipment Company 2009
20
• Press the [Tare] key to accept the time. The display will show the
current date format.
• Press the [Print] key to change the date format. Available formats are:
“Y-m-d” year, month, day
“m-d-Y” month, day, year
“d-m-Y” day, month, year
• Press the [Tare] key to accept the chosen format and then enter the
date in this format.
• Press the [Tare] key to accept the date.
An error code will be shown if the time (Err 1) or the date (Err 2) is not the
permissible values. For example, 34
th
day of a month is an invalid entry.
9.4 AUTO SLEEP FUNCTION
This function may be enabled or disabled by the user. If enabled, when the
scale is not used for some time (as pre-set by the user under this function) it
automatically switches off. To set this parameter-
• During self-checking, press [Zero] and release at once. The
display shows “SLEEP nodE”.
• Press [U. Wt./Units] key to scroll through the auto sleep values.
“0” Auto sleep mode disabled
“1” Auto sleep after 1 minute
“5” Auto sleep after 5 minutes
“10” Auto sleep after 10 minutes
• Press [Tare] to set the value. The scale returns to zero.