Nova-Tech CBC Series - Manual (Page 14)

© Adam Equipment Company 2009
12
automatically.
• This feature is turned off as soon as the number of items added
exceeds the count used as a sample.
6.3.4 Check-counting
• Check-counting is a procedure to cause an alarm to sound when
the number of items counted on the scale meets or exceeds a
number stored in the memory by using the
[Pst] key.
• The value to be stored is entered from the keyboard. Enter the
numeric value to be stored using the numeric keys. Then press
the
[Pst] key to store the value.
• To clear the value from the memory and thereby turn off the
check-counting feature, enter the value "0" and press [Pst].
6.3.5 Manually Accumulated Totals
• The values (weight and count) shown on the display can be
added to the values in the memory by pressing the [M+] key. The
" Weight" display will show the total weight, the "Count" display
will show the total accumulated count and the " Unit Weight"
display shows the number of times, the items have been added to
the memory for accumulation. The values will be displayed for 2
seconds before returning to normal.
• The scale must return to zero or a negative number, before
another sample can be added to the memory.
• More products can then be added and the [M+] key to be pressed
again. This can continue for up to 99 entries or until the capacity
of the “
Weight” display is exceeded.
• To observe the total stored value, press the [MR] key. The total
will be displayed for 2 seconds.
• To clear the memory- first press [MR] to recall the totals from
memory and then press the [CE] key to clear all values from the
memory.