Nova-Tech CBC Series User Manual
Page 15
© Adam Equipment Company 2009
13
6.3.6 Automatic Accumulated Totals
• The scale can be set to automatically accumulate totals when a
weight is placed on the scale. This eliminates the need to press
the
[M+] key to store values into the memory. However the [M+]
key is still active and can be pressed to store the values
immediately. In this case the values will not be stored when the
scale returns to zero.
• See the Section 9.0 on RS-232 Interface for details on how to
enable Automatic Accumulation.
7.0 PARAMETERS
The parameters are set to customise the scale to suit the weighing
applications. You need to enter a secure menu by entering a password when
requested.
• Press [Tare] once, during the initial counting of the display after
the power is turned on.
• The “Weight” display will show "PIn " requesting for the
password number.
• The default password is "0000" but other numbers can be set
using the parameter menus. Press the
[0] key four times.
• Press the [Tare] key.
• There are 2 functions that can be cycled through using the [U.
Wt./Units] key. The Weight window will show the parameter
number and the
Unit Price window will show the word describing
the function.
• The first parameter is “F1” “CAL”. (See section 8.0 for details)
• To enter into Calibration function, press the [Tare] key.
• To exit a parameter, press the [Zero] key.
• To select the second parameter press the [U. Wt./Units] key.