Nitek EL1500UW - Manual (Page 8)

Troubleshooting
PROBLEM POSSIBLE CAUSE
No video/data
Check camera and EL1500UW device connections.
Check UTP cable condition and RJ45 connectors.
Check that the camera is powered.
Check that supplied camera power meets manufacturer’s
specifications.
Check that UTP cable distance does not exceed PoE
capabilities. Refer to chart on pg 7.
Check that UTP cable does not exceed the EL1500UW’s
operating distances.
Check link & device status. See chart on pg 7.
Video/data loss
Check network switch termination & link status.
Check network routing tables.
Confer with site Network Administrator
For Tech Support Call (800)528-4343
Technical Specifications
Network Transmission Device
Network Port RJ45 Jack
Link Port
RJ45 Jack
Ethernet
[1] Auto Configuring 100BASE-TX Full Duplex
LED Indicators
Link Status, Power, PoE out, 10Mb or 100Mb
PoE Compliance
IEEE 802.3af & IEEE 802.3at
Max Operating Distance
1,960ft /600m
Max PoE Operating Distance(s)
See “PoE Distance Chart” on pg 7
Power Draw per Device
1.65 Watts each
NEMA4 Enclosure Dimensions
6.73” x 4.76 X 2.17
Transmitter/Receiver Dimensions 1.1” x 1.6” x 5.1” (including mounting tabs)
Operating Temperature
-15° to 75° C / 0° to 167° F
Mounting
Two 3/8 inch mounting tab slots
Shipping Weight
5 lbs
Humidity
Up to 95% non-condensing