Nitek IP1648M - Manual

Installation Instructions
IP1648 PoE Inserter
Note: This installation should be made by a qualified
service person and conform with local codes.
Reduce risk of fire or electrical shock do
not expose this product to rain or moisture.
Specifications
Size 1.75” H x 19.0” W x 8.6” D
Power Requirements 100 – 240 VAC
Output Voltage
IEEE802.3af compliant PoE
Output Power
15.4 Watts per channel
Enclosure Type
Standard 19” rack, 1RU in height
IP1648 Dimensional Diagram
IP1648 common hookup diagram
NITEK
®
5410 Newport Drive, Suite 24
Rolling Meadows, IL 60008
PHONE (847) 259-8900
FAX (847) 259-1300
WWW.NITEK.NET
Installation
1) Connect a 10/100 network switch to any lower row of RJ45 ports.
2) Connect a standard PoE camera or other device to the port directly above the 10/100
connection.
3) The IP1648 will automatically detect PoE devices and switch on the power to the PoE
device. When power is present for the PoE device the power LED for that port will be lit.
!
WARNING
CAUTION: To reduce the risk of electric shock do not remove cover. No user-serviceable
parts inside. Refer servicing to qualified service personnel.
060810
Network runs can be
up to 100 meters
IP1648
10/100 Switch
Network connections
PoE output connections
Up to 15.4 watts
Figure 1 Port Details
POE
OUTPUT
NETWORK
INPUT
POWER
680480103