Nitek FRS344000S00 - Manual

Installation Manual
FRS311000S00 Single Receiver
FRS322000S00 Dual Receiver
FRS344000S00 Quad Receiver
1, 2 and 4 Camera Stand Alone Receiver
Note: This installation should be made by a qualified service
person and conform with local codes.
Reduce risk of fire or electrical shock do
not expose this product to rain or moisture.
!
NITEK
®
5410 Newport Drive, Suite 24
Rolling Meadows, IL 60008
PHONE (847) 259-8900
FAX (847) 259-1300
WWW.NITEK.NET
Installation Instructions
- The fiber receiver is designed to be mounted using the included bracket.
- Always allow for bend radius of optical and electrical cables when installed.
- There are no adjustments required when using this product.
680600120 Rev 02092009
Service Information
There are no user serviceable parts inside the unit. In the event that service is required to this unit please
contact NITEK Technical Support at 800-528-4343.
Specifications
Video Connection
Connector
75 ohm BNC Socket
Output Impedance 75 ohm terminated
Output Level 1 volt p-p nominal
Frequency Response 10Hz to 5.75MHz
Optical Connection
Connector
SC Style
Path Loss 20dB
No Customer adjustments are available within the unit.
Wavelength
1310 / 1550nm
Power Connection
Supply
12 to 24VDC @ 300mA
FRS344000S00
CH
1
CH
2
CH
3
CH
4
Fiber Optic Video Transmission Systems
WWW.NITEK.NET
800-528-4343
NITEK
R
CLASS 1
POWER
12-18 VDC,
300mA, Class 2 -
+
VIDEO CH4
VIDEO CH2
VIDEO CH3
VIDEO CH1
POWER
VIDEO / OPTO
OPTO IN / OUT
CH1 CH2
CH3 CH4
CH1
CH2
CH3
CH4
FRS322000S00
CH
1
CH
2
Fiber Optic Video Transmission Systems
WWW.NITEK.NET
800-528-4343
NITEK
R
CLASS 1
POWER
VIDEO / OPTO
OPTO IN / OUT
CH1
CH2
CH1
CH2
POWER
12-24 VDC,
300mA, Class 2 -
+
VIDEO CH2
VIDEO CH1
FRS311000S00
CH
1
CH
2
Fiber Optic Video Transmission Systems
WWW.NITEK.NET
800-528-4343
NITEK
R
CLASS 1
POWER
12-24 VDC,
300mA, Class 2 -
+
VIDEO CH2
VIDEO CH1
POWER
VIDEO / OPTO
OPTO IN / OUT
CH1
CH2
CH1
CH2
Color Description
Green System Normal
Yellow (RX) Link working, No video at TX
Red (TX) Power on, No video into TX
(RX) Power on, No opto into RX
Power/Video/Opto LED