Dixon Valve 25 TON RAM SEC01 Holedall Fittings - Manual (Page 8)

Holedall II External Swage Ferrules
Stainless External Swage Ferrules
External Swage Notched NOS Stems and Ferrules
Hose
ID
Hose OD Carbon Steel
from to Part #
1½"
2"
3"
4"
1-58/64"
2-28/64"
3-30/64"
4-30/64"
2-2/64"
2-34/64"
3-38/64"
4-42/64"
FW24
FW32
FW48
FW64 1
For use with Royal-Flex™ thin wall hose. These specially
designed carbon steel ferrules have serrations on the outside
and should be used with stem styles TM, TP and TG stems on
page 6.
1 4" takes special stem; TM64-42
Light duty 304 stainless ferrules for use with standard length
stems such as the TMR series. Consult Dixon for die
recommendations. Refer to the Dixon Pressure Slide Chart
for specific pressure recommendations.
Hose
ID
Hose OD 304 Stainless Steel
from to Part #
1½"
2"
3"
4"
1-60/64"
2-4/64"
2-30-64"
2-42/64"
3-30/64"
3-47/64"
4-40/64"
2-12/64"
2-22/64"
2-44/64"
2-54/64"
3-46/64"
3-54/64"
4-47/64"
GAS2334TO
GAS2370TO
GAS2709TO
GAS2885TO
GAS3760TO
GAS3885TO
GAS5010TO
Hose
ID
Hose OD 304 Stainless Steel
from to Part #
1½"
2"
3"
4"
1-60/64"
2-4/64"
2-30-64"
2-42/64"
3-30/64"
3-47/64"
4-40/64"
2-12/64"
2-22/64"
2-44/64"
2-54/64"
3-46/64"
3-54/64"
4-47/64"
GAS2334NOS
GAS2370NOS
GAS2709NOS
GAS2885NOS
GAS3760NOS
GAS3885NOS
GAS5010NOS
ferrules
Hose
ID
316 Stainless Steel
Part #
1½"
2"
3"
4"
RST150NOS
RST200NOS
RST300NOS
RST400NOS
male NPT stems
with wrench flats
• The largest advantage of the notched design is that the coupling can be removed from a damaged hose by cutting away the
ferrule, without necessarily damaging the fitting. After inspection of the fitting to determine its suitability for reuse, it can be
reinstalled into another hose by using a new ferrule.
• The notched system allows you to better manage your inventories. You can stock one stem and two ferrules, and cover the
same hose range with less inventory. You must purchase a stem and the matching ferrule to create an assembly.
• For hose outside diameters of 2-4/64" and below, the couplings are crimp only.
• For hose outside diameters of 2-5/64" and above, the couplings can be crimped or swaged.
• See page 22 for cam and groove style notched NOS fittings.
Only use the NOS shank with the NOS ferrules.
Due to differences in dimensions and tolerances for safety reasons, do not use other
manufacturer's stems or ferrules with Dixon Holedall products.
8 877.963.4966 • www.dixonvalve.com
Holedall
K
Holedall