Dixon Valve CI9 Large Diameter Coupling Inserter - Manual (Page 2)

877.963.4966
Fax: 800.283.4966
www.dixonvalve.com
Dixon Valve & Coupling Co.
800 High Street
Chestertown, MD 21620
© 2010 DVCC CI9INHOUSE1010
If the cylinder runs out of stoke before the coupling
is fully inserted, apply pressure to the back of the
cylinder, unlock and pull on the chains, and retract
the cylinder. Once the cylinder is fully retracted, re-
lock the chains.
7.
Continue inserting the fitting as described in step 6.
Repeat steps 6 and 7 until the fitting is fully inserted.
8.
Unlock the chains and remove the coupling inserter
beam from the pusher plate.
9.
Remove the pusher plate from the fitting.
10.
Remove the chains from the hose. Inspect the
hose body.
11.
45CIPUSH - 4" and 5" hose ID (threaded, weld
end, victaulic)
68CIPUSH - 6" and 8" hose ID (threaded, weld
end, victaulic)
1012CIPUSH - 10" and 12" hose ID (threaded,
weld end, victaulic)
Required Pusher Plates
(must be purchased separately)