VIEWSONIC PJL855 Office Theater - Manual (Page 12)

11 ViewSonic PJL855 Operation
OPT. (OPTION) Menu
The OPT. Menu allows you to adjust the Communication Function* (COM. SPEED and COM. BITS), enabling
you to control the projector from a computer. The OPT. Menu also allows you to set the TIMER , select the
LANGUAGE for all on-screen displays, activate AUTO OFF and START UP.
IMPORTANT: If AUTO OFF is activated and shuts off the projector lamp, wait at least one (1) minute. Then
press--and briefly hold--the STANDBY/ON button. The lamp will turn back on.
* NOTE: Computer control of the projector (communication function) is an advanced feature that requires
specialized software not included with the PJL855. To develop this software you will need various control
codes and other suplementary information availaible from ViewSonic Customer Support. (See the back of
this guide for contact information.)
OPT. (OPTION)
Menu Options
Details about Selection Options
COM. SPEED
(COMMUNICATION)
Selects data speed of transmission:
1200, 2400, 4800, 9600, 19200.
(Used for computer control of projector)
COM. BITS
Selects data transmission format:
7N1...7 data bits, No Parity, 1 Stop bit
8N1...8 data bits, No Parity, 1 Stop bit
(Used for computer control of projector.)
TIMER
A countdown timer (up to 99 minutes)
you can activate whenever needed. The
time remaining displays at bottom of the
projected picture.
LANGUAGE
Selects language of On-View menus:
English, Francais (French), Deutsch
(German), Espanol (Spanish), Italiano
(Italian), Norsk (Norwegian), Nederlands
(Dutch)
AUTO OFF
Sets time (up to 99 minutes) the lamp
will automatically turn off and the
projector will switch to Standby Mode if
an input source is not detected. To
disable AUTO OFF, set minutes to 0.
START UP
Toggles on/off the "ViewSonic ® See the
Difference" start-up screen (which is
displayed each time the projector is
powered on).