Detroit Radiant Products Company DR Series - Manual (Page 13)

Mount 20˚ - 35˚
from horizontal
DR Series Manual
12 13
2.0 Installation • Heater Mounting
Figure 2.4 • Heater Orientation
Figure 2.5 • Gas Connection
Steel C-clamp
Chain hanging set
Mount Heater Level - Side to Side
Pilot/spark electrode
must be in lower
right corner.
(excludes DR30S)
Manifold control box must be located towards
the lower end of the heater (towards the floor).
Drip Leg/Sediment Trap
NOTE: Use a
regulator when gas
supply pressure
exceeds 14” W.C.P.
Do not exceed 14”
W.C.P to the
appliance.
Ball Valve / Inlet Tap
Disconnect switch
Stainless Steel Gas Connector, formed into
a smooth C-Shape (Field Supplied)
Not for use with rigidly mounted heaters.
SIDE VIEW FRONT VIEW
SIDE VIEW
20˚ - 35˚
TOP VIEW