Apple Macintosh LC 575 - Manual (Page 8)

Plugging in the computer
Plug in the Macintosh before connecting anything to it. The plug
grounds the computer and protects it from electrical damage
while you are setting up.
S
Important: To protect both yourself and the computer
from electrical hazards, the computer should remain turned
off until you are finished connecting its parts. Check the main
power switch at the back of the computer. Make sure that the
bottom of the switch (marked with an “
j”) is pressed in.
S
1. Plug the socket end of the power cord into the recessed
power plug (marked with the symbol
≤) on the back
of the computer.
S Important: Make sure at least one end of the power cord is
within easy reach so that you can unplug the computer when
you need to.
S
2. Plug the other end of the power cord into a three-hole
grounded outlet or power strip.
Socket end of the
power cord
Power
cord plug
Main power
switch
2 Setting Up