Advantech AIMB-258 User Manual
Page 52
AIMB-258 User Manual
44
To Establish Password
1.
Choose the Set Password option from the CMOS Setup Utility main menu and
press
2.
When you see “Enter Password”, enter the desired password and press
3.
At the “Confirm Password” prompt, retype the desired password, then press
4.
Select Save to CMOS and EXIT, type
To Change Password
1.
Choose the Set Password option from the CMOS Setup Utility main menu and
press
2.
When you see “Enter Password”, enter the existing password and press
3.
You will see “Confirm Password”. Type it again, and press
4.
Select Set Password again, and at the “Enter Password” prompt, enter the new
password and press
5.
At the “Confirm Password” prompt, retype the new password, and press
6.
Select Save to CMOS and EXIT, type
To Disable Password
1.
Choose the Set Password option from the CMOS Setup Utility main menu and
press
2.
When you see “Enter Password”, enter the existing password and press
3.
You will see “Confirm Password”. Type it again, and press
4.
Select Set Password again, and at the “Enter Password” prompt, please don’t
enter anything; just press
5.
At the “Confirm Password” prompt, again, don’t type in anything; just press
6.
Select Save to CMOS and EXIT, type
Note!
To enable this feature, you should first go to the Advanced BIOS Fea-
tures menu, choose the Security Option, and select either Setup or Sys-
tem, depending on which aspect you want password protected. Setup
requires a password only to enter Setup. System requires the password
either to enter Setup or to boot the system. A password may be at most
8 characters long.