Acer AL1912 - Manual (Page 10)

- 10 -
LCD monitor General specification
Panel Type: 19 “ active matrix color TFT LCD
1). Fujitsu FLC48SXC8V-10
Display size: 376.32mm (H) × 301.056mm(V)
Display mode: VGA 720 × 400 (70 Hz)
VGA 640 × 480 (60/66/70/72/75 Hz)
SVGA 800 × 600 (60/70/72/75 Hz)
XGA 1024 × 768 (60/70/75 Hz)
SXGA 1280 × 1024 (60/70/75 Hz) standard resolution
Pixel pitch: 0.294mm(H) × 0.294mm(V)
Display Dot: 1280 x (RGB) × 1024
Pixel Clock: 25.2 – 135.0MHz
Contrast ratio: θ = 0˚ HYDIS 700:1 (typical)
Brightness: HYDIS:300 (typical)
Response time (Tr/Tf): Ta=25°C, 15/10ms (typical)
Display color: 16.2M
Viewing angle: HYDIS L / R ≧ 85 / ≧ 85
U / D ≧ 85 / ≧ 85
Luminance Uniformity: > 75 % (min)
Pc interface: 1).Video: RGB analog 0.7V peak to peak
Sync: TTL positive or negative
Signal connector: 15 pin Mini D type, (standard VGA video)
3.5 mm stereo audio jack (Audio) (For AL1912 m only)
Audio power: 0.5Wrms + 0.5Wrms (300Hz – 10kHz (S.P.L. – 10 dB))(AL1912 m only)
Front control: power on/off with LED select adjustment (+,-)
Interface frequency
Horizontal Frequency 24KHz --80KHz
Vertical Frequency 49Hz ------75Hz
Plug & play: Support VESA DDC2B functions
Power Input voltage: Single phase, 50/60HZ, 100 VAC to 240VAC ±10%