MaxPower Corp UniStar P Rack - Manual (Page 4)

Advanced Battery Management
The UniStar ® P automatically manages
the end of discharge voltage according
to load. This function prevents deep-
discharge of the built-in battery during
a power failure and saves battery life.
Galvanic Isolation Transformer
The galvanic isolation transformer
provides not only complete isolation
between the input and the output, but
also various secondary voltages, such
as 220/230/240 Vac, 208/120 Vac and
240/120 Vac.
User Personalization
Through the LCD front panel, you may
easily change the parameters and settings
built in to the DSP controllers, such as UPS
operation modes, voltage confi gurations,
synchronization frequency windows
(for use with generators), bypass voltage
tolerances and audible alarm.
Cold Start Function
Users can turn on the UPS without utility
power available.
Variety of Customer
Options Slots
This UPS also provides two customer
option communication slots in
addition to the standard RS232 port.
All communications cards are designed
for simple installation; electrical
connections are made through a
26-pin edge card connector. The
fi rst RS232 port on the rear panel will
remain active, even though optional
communication cards are installed.
Communications Capability
The UniStar ® P is shipped with standard
monitoring/shutdown software. The
software allows control of the UPS and
graceful shutdown when the utility
power fails, but also allows the user to:
■
Remotely test the major operating
functions of the UPS
■
Communicate via SNMP/WEB card
■
Access UPS functions via the WEB
Hot-Swappable Battery
The UniStar ® P allows users to
replace batteries without
electric shock hazard, while
the UPS supplies continuous
power to your application.
Optional External Battery
Charger
The optional charger can be installed
for fast recharge of the extended
battery pack.
■
Power Output: 1000W
■
Mounting: UPS or
wall mount
Matching
Extended
Battery Pack
Optional matching battery
packs are available to easily extend
the UPS runtime to several hours.
6kVA Single Phase UPS Rack Mount
Extended Battery Run Times (minutes)
www.stacoenergy.com
20 X Cabinet (1 string)
UPS
Size
Part
Number
Qty. of
Cabinets
25%
Load
50%
Load
75%
Load
100%
Load
6 kVA
No Internal
Batteries
0 0 0 0 0
SC-BP6000RM-1
1 56 22 12 8
2 137 56 33 22
3 226 95 56 38
4 321 137 82 56
5 420 180 109 75
Note: Battery times are based on new batteries +/- 5%