MAX GS865E - Manual (Page 11)

11
2. SPECIFICATIONS AND TECHNICAL DATA
1. NAME OF PARTS
2. TOOL SPECIFICATIONS
PRODUCT NO. GS865E
HEIGHT 18-1/4˝ (467 mm)
WIDTH 4-3/4˝ (122 mm)
LENGTH 17-3/4˝ (450 mm)
WEIGHT
9.7 lbs. (4.4 kg)
(including Fuel Cell and Battery)
LOADING CAPACITY 40 pins
BATTERY
Battery JP606H for
MAX Cordless Fastening System
BATTERY CAPACITY 6V DC, 1.5 Ah
CHARGER
Charger JC610M for MAX Cordless
Fastening System
POWER SOURCE 100-240V AC, 50 or 60 Hz
POWER CONSUMPTION
8VA (10V 800mA)
(Rated output)
CHARGING TIME
150 minutes at maximum
ACCESSORIES
Carrying case, Battery,
Charger
q w
r
t
y
u
i
e
!7
!8
!9
o
!4
!5
!6
!3
@0
!0 !1 !2
@1
@2
q Air Filter Cover
w Fuel Cover
e Body
r LED
t Trigger
y Battery
u Hook
i Pin Stopper
o Contact Arm
!0 Pusher Holder
!1 Pusher !2 Magazine
!3 Tail Cover
!4 Pack Cap
!5 Terminal Block
!6 Battery (JP606H)
!7 Battery Setting Hollow
!8 Jack
!9 Power Cord
@0 Charger (JC610M)
@1 Power Plug
@2 AC Adapter
3. FASTENER SPECIFICATIONS
4. TECHNICAL DATA
q NOISE
A-weighted single-event ------ LWA, 1s, d 113.16 dB
sound power level
A-weighted single-event ------ L p A , 1s, d 105.06 dB
emission sound pressure
level at work station
These values are determined and documented in accordance to EN12549 : 1999.
w VIBRATION
Vibration characteristic value ＝ 5.93 m/s 2
These values are determined and documented in accordance to ISO 8662-11.
This value is a tool-related characteristic value and does not represent the influence to the hand-arm-system when using the tool.
An influence to the hand-arm-system when using the tool will for example depend on the gripping force, the contact pressure
force, the working direction, the workpiece, the workpiece support.
PIN LENGTH 3/4˝ to 2-1/2˝ (19 to 65 mm)
SHANK DIAMETER .102˝, .145˝ (2.6, 3.7 mm)
SHANK TYPE Smooth
HEAD DIAMETER .252˝ (6.5 mm)
NOTE: The triangle symbol marked as “ ▽” following its tool serial number indicates that safety yoke is equipped with this tool.