Little Colorado Bench Toy Box 17 - Manual (Page 3)

Quality Wooden Children’s Furniture and Accessories
Made in America • Established 1987
www . littlecolorado . com
Bench Toy Box Assembly Instructions- Continued
Revised 09/09
by
W.McClung
Please Recycle Instructions
• Now that you have completed the assembly,
open and close the lid 10 times to break in the
lid support mechanism.
• The lid should not fall when the Lid Support is
properly installed.
• If the lid does not stay in position when raised,
please call us and we will help you. Until the lid
support is properly installed, do not allow
children to use this product.
• Now use the tapered Plugs to fill in the exterior
screw holes located on the outside face of the
Arm Rests. The finished face of the Plug should
be showing.
Taylor
7 8
If you would like your Bench Toy Box Personalized
with your child’s name. Contact us at 303 964 3212
and we will take your order and mail you your
child’s name complete with mounting instructions.
If you have any problems, please call us and we will help you 303 964 3212 or email [email protected] 4450 Lipan St.,Denver, CO 80211
Page 3 of 3
Use and Care Instructions
The finish on this product is an environmentally friendly water base acrylic made by Sherwin Williams. It may be cleaned with a furniture polish,
lemon oil or a non abrasive cleaner using a soft cloth. DO NOT USE AMMONIA or products containing ammonia such as Windex glass or
multi-surface cleaner. Scuff marks can usually be removed by using a polishing compound sold at auto parts stores.
Little Colorado, Inc is a family run children’s furniture manufacturer located in Denver. Please check out www.littlecolorado.com to see our
other products that are all made here in America. The safety of your children is our highest concern. We are a GREEN company and hope you
will be able to recycle the packaging material that we used to ship your product.
If you have a comment or a question please contact us at info at [email protected]. All of us at Little Colorado hope you and your family
will enjoy this product for many years.
Face of Plug
Failure to properly install
the lid support will result in
an entrapment hazard.