Little Colorado Child's Adirondack End Table 142 - Manual

All of us at Little Colorado, Inc hope that you and your little ones enjoy this Adirondack End Table for many
years. Please call us if you have any questions.
Manufactured in America by:
Little Colorado, Inc. 4450 Lipan Street Denver, Colorado 80211
Phone 303-964-3212 Fax 303-964-3213 [email protected]
1-Table top
4- Legs
12- 1 5/8" Wood Screws
Contents:
1. Please inspect all parts for damage during shipping and
for any missing items. If you suspect that there may be
damage or a shortage, call us and we will send replacement
parts if needed. At this time, visualize how the components
fi t together per the drawing and make sure that you have ev-
erything identifi ed. You will need a standard phillips screw-
driver to complete assembly.
2. Place the Table Top upside down on a carpeted surface.
Position one of the legs in the inside corner as illustrated.
Holding the leg tight against the corner, install three screws
through the pre-drilled holes in the outside of apron and into
the leg. The legs do not have pre-drilled pilot holes and may
be oriented however you choose. Please make sure that the
leg is fi rmly touching the two sides and the underside of the
table when you start the screws. Screw in the wood screws
until they are tight and the heads are slightly below the sur-
face of the wood.
3. Now attach any two of the remaining three legs.
4. Turn the table over so that it is upright and place on a
hard fl at surface. Hold the fourth leg into position. The table
should sit squarely on the fl oor and not rock. If if does rock,
adjust the height of the leg until it until it sits fl at on the fl oor.
Now attach this last leg.
WARNING: ADULT ASSEMBLY REQUIRED
WARNING: Assembly kit contains parts with sharp edges.
WARNING: Assembly kit contains parts with sharp points.
WARNING: Package contains plastic bags that present suffocation risks for children.
WARNING: Assembly kit contains small parts that present choking hazards for children.
Quality Wooden Children’s Furniture and Accessories
Made in America • Established 1987
www . littlecolorado . com
®
Inc.
Revised 07/10
Page 1 of 1
N. Tommer
Assembly Instructions For Child's Adirondack End Table Item #142
Care and Cleaning:
If this Chair is unfi nished, it must be totally protected by an outdoor/exterior rated stain or house paint BEFORE
being used outside. Exposure to any weather or even sun can cause rapid deterioration, cracking, warping,
splitting and discoloration of unfi nished wood.
If this Chair is painted, the fi nish is designed to provide long lasting protection when exposed to the harshness
of weather. But no matter how durable, painted wooden furniture should not be left outdoors continually. It is
best to store it inside when not in use. Even in mild conditions, painted wood furniture left outdoors will eventually
fade and show the effects of exposure to weather. To clean your painted furniture, use a mild detergent such as a
dishwashing liquid and a soft cloth.
Never use any type of abrasive cleanser.