Mallory Ignition Mallory EDELBROCK FUEL INJECTION DISTRIBUTOR 6148201_6164501 - Manual

EDELBROCK
SYSTEM
IGNITION
AMPLIFIER
BLACK (NOT USED)
FROM EDELBROCK
MAIN WIRE HARNESS
BROWN (COIL –)
RED (COIL +)
TO COIL (+)
IGNITION
CUT WIRE HERE
NOT USED –
DISCARD PLUG
–
+
COIL
GROUND TO
ENGINE BLOCK
BLACK
NOTE: THIS GROUND MUST BE
CONNECTED TO PROPERLY GROUND
THE EDELBROCK SYSTEM
FROM EDELBROCK
MAIN WIRE HARNESS
MALLORY EDELBROCK FUEL
INJECTION DISTRIBUTOR
NOTE THE POSITION OF #1 CYLINDER ON
THE DISTRIBUTOR HOUSING. CONNECT
THE #1 SPARK PLUG WIRE AT THIS
LOCATION ON THE DISTRIBUTOR CAP.
THIS IS REQUIRED FOR THE EDELBROCK
SYSTEM TO FUNCTION PROPERLY.
1
MALLORY IS A DIVISION OF THE MR. GASKET PERFORMANCE GROUP
550 MALLORY WAY, CARSON CITY, NV 89701
(775) 882-6600 FAX (775) 887-4326
www.mrgasket.com
FORM 1030
(REV. A) 03/01
MADE IN U.S.A.
PRINTED IN U.S.A.
INSTALLATION INSTRUCTIONS
®
MALLORY EDELBROCK
FUEL INJECTION DISTRIBUTOR