beautypg.com

Mallory Ignition Lakewood Battery Relocation Kit 30301 User Manual

Page 2

background image

www.lakewood-industries.com LAKEWOOD

2

LAKEWOOD IS A TRADEMARK OF PRESTOLITE PERFORMANCE
10601 MEMPHIS AVE #12, CLEVELAND, OH 44144
216.688.8300

FAX 216.688.8306

FORM 97101872

04/11

STEP 9
Choose location in trunk for battery box and mount box using
hardware supplied. The vent tube must be routed to outside
of vehicle (see Figure 2). If an alternator cable is used an
additional hole will need to be drilled in the box to allow for
cable pass-through. Install cables into battery box and cut to
proper length for battery post locations, terminate cable ends
with appropriate hardware provided.

STEP 10
Reinstall interior panels, inner fender well and front right side
wheel. Remove jack stands and place vehicle back on ground.

STEP 11
Install battery into newly installed box in trunk and attach battery
cables to corresponding terminals of battery. Place cover onto
box and fasten with hardware provided.

NOTE: If installing a Master Battery Disconnect Switch all cables
including alternator must route to switch and then to battery. In 2011
applications consult factory wiring schematic for proper alternator
disconnect.

Figure 1

Figure 2