Mallory Ignition Lakewood STRUT TOWER BRACE 39001 - Manual

1 LAKEWOOD www.lakewoodindustries.com
LAKEWOOD STRUT TOWER BRACE
INSTALLATION INSTRUCTIONS PART NO. 39001
2008 – 2010 DODGE CHALLENGER RT
FORM 97146777 08/10
Thank you for your purchase from Lakewood Industries. For
technical assistance, please call 216-688-8300 Monday thru
Friday 8:30 AM to 5:00 PM EST.
WARNING: DUE TO THE TECHNICAL NATURE OF THIS PRODUCT,
AND SPECIALIZED EQUIPMENT, PROFESSIONAL INSTALLATION IS
RECOMMENDED.
CAUTION: INSTALLATION OF THIS PRODUCT REQUIRES WORKING
UNDER THE VEHICLE. IT IS THE RESPONSIBILITY OF THE INSTALLER TO
ENSURE A SAFE WORKING ENVIRONMENT. THE USE OF AN AUTOMOTIVE
LIFT IS RECOMMENDED. MAKE SURE THAT THE VEHICLE IS SAFELY
SUPPORTED AND ALWAYS USE JACK STANDS. ALWAYS WEAR
SAFETY GLASSES.
LAKEWOOD CHASSIS AND SUSPENSION PRODUCTS ARE ENGINEERED AND MANUFACTURED TO IMPROVE THE PERFORMANCE OF YOUR VEHICLE.
WE ENCOURAGE YOU TO ENJOY USING OUR PRODUCTS SAFELY AT A SANCTIONED RACING FACILITY. PLEASE OBEY ALL TRAFFIC LAWS.
1. Remove the factory plastic strut tower caps
2. Loosen and remove the 3 strut mount nuts on each
strut tower
3. Position the strut tower brace with the offset facing the front
of the vehicle and lower the brackets down over the strut
mount studs
4. Reinstall the nuts removed in step 2
5. The factory strut tower caps will require some trimming
with tin snips or a dremel tool to clear the strut tower
brace brackets.
6. After trimming the strut tower cap, reinstall on the
mount studs.
Go to: www.prestoliteperformance.com
to see a video installation of this product.
LAKEWOOD IS A TRADEMARK OF PRESTOLITE PERFORMANCE
10601 MEMPHIS AVE #12, CLEVELAND, OH 44144
216.688.8300
FAX 216.688.8306
FORM 97146777
08/10
Made in U.S.A.
Printed in U.S.A.