Mallory Ignition Lakewood traction bars 21720 User Manual
Page 2
RECOMMENDED ADJUSTMENTS
Your rear suspension can be fine tuned for street or
strip by adjusting the traction bars. For a better ride,
the snubber clearance gap should be increased. For a
firm competition ride, the snubber clearance gap can
be decreased. If vehicle torque steers (pulls to right
or left) under acceleration due to traction bars, the
snubber clearance gap can be adjusted to eliminate
this problem.
To correct unequal traction, try the following:
a) Be sure that both tire pressures are equal.
b) If vehicle torque steers to the right under
acceleration, decrease the gap on the
right side bar.
c) If vehicle torque steers to the left under
acceleration, decrease the gap on the left
side bar.
REPLACEMENT PARTS
Urethane Snubbers(2/set) . . . . . . .#20700
Rubber Snubbers
(2/set) . . . . . . .#20530
TECHNICAL SERVICE
A highly trained technical service department is
maintained by Lakewood Industries to answer your
technical questions, provide additional product
information and offer various recommendations. See
your local retailer of Lakewood products for specific
prices. Technical service calls, correspondence and
warranty questions should be directed to the
following address:
Lakewood Industries
10601 Memphis Ave. #12
Cleveland, Ohio 44144
Phone 216-688-8300 ext. 500
8:30 A.M.-12:00 P.M., 1:00 P.M.-5:00 P.M. EST
www.mrgasket.com
RETAIN THIS INSTRUCTION SHEET
FOR FUTURE REFERENCE.
P/N 97144065