Retain this instruction sheet for future reference – Mallory Ignition Lakewood REAR UPPER CONTROL ARMS 20152 User Manual

Page 2

7. Follow the same above procedure for installation of

Lakewood Control Arm on other side of vehicle.

8. Lubricate control arm bushings with a good quality

chassis grease.

9. Install wheels and properly tighten lug nuts to wheel

manufacturers specifications.

10. Carefully remove support stands and lower vehicle

to ground.

THIS COMPLETES THE INSTALLATION.

YOU CAN NOW TEST DRIVE THE VEHICLE.

IMPORTANT!

Periodically check to make sure that all mounting

hardware is securely tightened. Use a good

quality chassis grease to keep bushings and

sleeves properly lubricated.

TECHNICAL SERVICE

A highly trained technical service department is

maintained by Lakewood Industries to answer your

technical questions, provide additional product

information and offer various recommendations. See

your local retailer of Lakewood products for specific

prices. For best results, technical service calls,

correspondence and warranty questions should be

directed to the following address:

Lakewood Industries

10601 Memphis Ave. #12

Cleveland, Ohio 44144

Phone 216-688-8300

8:30 A.M.-5:00 P.M. EST

www.mrgasket.com

Recommended optional Lakewood products:

• For drag racing, use Lakewood Traction… Action Lift

Bars for 1979-98 Mustangs #21900, for 1999-03
Mustangs #21901

• For drag racing, the factory rear shocks should be

replaced with a 50/50 ratio shock absorber (1979-1993
Mustangs) #40301

• Front Drag Struts are also available for

1979-93 model years in ratios of 70/30 #40501, or
90/10 #40511. Also 1994-2003 Mustangs 70/30 #40506,
and 90/10 #40516

• Rear Lower Control Arms with polyurethane bushings

to reduce flex and provide stability for 1779-98
Mustangs #20150, and 1999-03 Mustangs #20151

• Bolt-on Subframe Connectors for 1979-93 Mustang

will help eliminate body flex and greatly strengthen
the chassis #20485

• Replacement Bushing Set. Bushings for all Mustang

Lakewood Control Arms and Traction Bars #20538

• Bolt-in Drive Shaft Safety Loop for 1979-03 Mustangs

#18017

See your local retailer of Lakewood products

for specific prices.

RETAIN THIS INSTRUCTION SHEET FOR FUTURE REFERENCE.

P/N 97140000